TENOLAN film packing
The manufactured films have a thickness from 6 μm to 150 μm. A standard series of thickness is shown in the material lists of particular types of films.
Film rolls or coils are produced at widths from 20 mm to 2900 mm.
The permitted film width tolerances are as follows:
- widths up to 100 mm ± 0.5 mm
- widths 100-400 mm ± 1 mm
- widths exceeding 400 mm (+ 2 mm; -1 mm)
Other tolerances may be agreed on within a contract of purchase.
The greatest dimension of films trimmed to size is 1140 mm.
Tolerances of trimmed films are ± 5 mm unless agreed otherwise.
Films of required width and quantity are rolled on paper tubes or trimmed to size.
Standard inner Ø of a paper tube is 76.2 mm or 152.4 mm. With small rolls of film it is possible to use paper tubes of Ø 40 mm.
Rolls might comprise several pieces taped together by colour or transparent self-adhesive polyester tape. The number of such joined pieces may be agreed on within a contract of purchase.
Rolls of widths exceeding 300 mm are packed in protective PET film. Once plastic front parts are fixed in place, the rolls are loaded onto pallets so that the total height of loaded rolls does not exceed 1.5 m. To prevent any involuntary movement of such rolls, they are secured with a wooden stop, bound by cord, and the entire pallet is wrapped in shrink foil.
Rolls of widths less than 300 mm (disks) are packed in PE bags or PET film and placed in cardboard boxes. Individual layers are separated by cardboard sheets. The cardboard boxes are bound to a pallet with cords running lengthwise and crosswise.
Films trimmed to size or on small rolls are packed in protective foil and placed in a cardboard box, or a box with 2 compartments of suitable dimension.
Another method of packing can be agreed upon between the customer and the manufacturer in a contract of purchase so that the products are sufficiently protected against dust, dirt and damage.
Each packing unit is affixed with a label showing the following data:
- identification of the manufacturer
- names of th product and type
- quantity in kg and m
- identification number of the roll
- date of manufacture
- quantity of rolls or pieces in a packing unit
- name or mark of the dispatch employee responsible
- other agreed details.
Another way of labelling may be agreed upon in a contract.